Hello! I hope you enjoy my newest print. Didn't find any cool icicles so I decided to make one.

If you do not have a printer and want one, my shop is here: https://www.etsy.com/shop/kenji3d

So to print, you can do .15 or .2mm resolution, 0% infill, no supports, but do add a brim to keep it sticking to the heat plate while printing. I did a 10mm brim, then just broke it off after. I did 50% scale (i left it big for any size printer), but you can do any size you want (however the hole on the bottom will need to be modified if you will still use the LED)

The hole on the top is for the LED light, you will have to push it out or use a drill of some sort to make the hole. I tried to make it with my 3d program but it could not do it correctly. Just drill the hole until the LED light fits, you can always use superglue as well. Then just use string or fishing wire on the top of the LED to hang on the tree

These are the LED lights

Color flashing: https://www.amazon.com/gp/product/B00VB53ZD2/

Blue solid: https://www.amazon.com/gp/product/B00LZUX05Q/

You can use white or clear/transparent PLA, this was the spool I used (the other brand I bought kept clogging) https://www.amazon.com/gp/product/B00MB3CV6K/