"NATIVITY21" A nativity set for the 21st Century - each character is represented as if the Nativity were happening today.

The full story and details are to be found in the blog https://nativity21.wordpress.com

These models are very intricate and may be damaged by removal of support material. Therefore some of the models have been provided in "no hands" versions so you can print the hands separately to glue them on after the print. (otherwise it is possible to rip the fingers off with the support material, very painful!).

If your printer has difficulty printing the shepherds crook held aloft, (mine did), then I have provided the hand and crook separately. I hacksawed off the poorly printed hand and crook and glued on the separate one afterwards.

Please take time to read and follow the blog and if you want to, have a tremendous amount of fun printing and painting these models.

Designs and materials are shared under the Creative Commons licence: “Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)”

This artwork includes elements from the following publishers

Dog by Yahoo Japan https://www.yahoo.co.jp/

Riding Boots & Heel Sandals by punkduck http://www.makehumancommunity.org/clothes/riding_boots.html

Low Poly Bowl (used to hold Myrrh as one of the three gifts) by John Woods http://johnwoodsart.tumblr.com/

The following 3D design Tools were used

MakeHuman http://www.makehumancommunity.org Blender https://www.blender.org Autodesk TinkerCAD https://www.tinkercad.com/ Ultimaker Cura https://ultimaker.com/en/products/ultimaker-cura-software

The models were printed on a Geeetch Prusa I3 Pro https://www.geeetech.com