A general purpose 2" c-clamp utilizing a M8x50mm bolt.

The frame of the clamp was downloaded from a public CAD library and modified to house the matching M8 nut to accompany the bolt.

There is a swivel pad threaded to the end of the bolt which required support material for my built. Once the support was disolved, the two halves of the swivel were gently seperated with a pair of pliers.

Hardware:

1. M8x60 bolt
2. M8 nut
3. Cyanoacrylate adhesive
4. Two pair of pliers

Printing:

1. Frame: print it flat to maintain the strength of the frame.
2. Handle: designed to accept the hex of a M8 bolt
3. Nut Cover: used to retain the nut that will be glued to the frame.
4. Swivel Pad: printed with support and has M8 threads already modeled in.

Assembly

1. Press the nut deep into the hex hole of the frame. The nut should sit 2mm below the hole edge.
2. Glue in the nut cover.
3. Thread the bolt into the frame.
4. Remove the support material from the swivel pad.
5. Using two pliers grip both halves of the swivel pad assembly and gently twist the two in opposite directions to free the two parts.
6. Thread the swivel pad onto the bolt...no need to glue
7. Glue the handle to the hex head of the bolt.