Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D MicroCube CXY por Stargrove1 no Thingiverse

Descrição

The MicroCube CXY is a small, inexpensive 3D printer, its the update of the MicroCube using the core xy setup. Most of the parts are reused from the MicroCube, by this modular approach, it is possible to update an existing printer by replacing only the required parts.

This site provides all parts to print the whole printer as well as the pre configured firmware, the steps per unit of the extruder need to be adapted to the used extruder. The output of the heatbed is used to drive the hotend fan. Some of the parts are optional, for example, holder for two different boards are available, RAMPs and MKS board from BigTreeTech.

Original MicroCube: https://www.thingiverse.com/thing:1938877

Features:

+ Still low cost + Easy to build + Printable Area of 120mm x 110mm x 90mm + Small footprint 220mm x 220mm + Modular + Removable print bed

History

2018/11/17 Version 1.0 Initial Version core xy design 2019/03/31 Added x_carriage_level.STL for SN04-N probe Added Motor_mount_Nema17_r.STL + tensioner for better control of string tension (to be printed mirrored for left holder)

Video

https://youtu.be/_KIqJPmNiKA https://www.youtube.com/watch?v=PnsqL8v9QT0 https://www.youtube.com/watch?v=besuCNM-j0c&t=7s

For additional information, please refer to the manual of the MicroCube

Thingiverse

MicroCube CXY

Stargrove1 Stargrove1 (abre em nova aba)
226
Curtidas
0
Downloads
337
Coleções
4
Impressões
Tags
3d printer corexy Core XY diy nema17 reprap
Licença Creative Commons - Attribution
Arquivos (39)
Bigtreetech_holder_front.STL 65 KB
Cable_Clip.STL 26.6 KB
Cable_Clip_big.STL 26.6 KB
Extruder_holder_universal.STL 42.5 KB
Extruder_Nem17_Mount.STL 38 KB
Extruder_Nem17_Mount_strip.STL 18.8 KB
Extruder_Nem17_axis.STL 25.1 KB
Bigtreetech_holder_rear.STL 45.2 KB
Extruder_Nema17_Lever.STL 68.7 KB
Extruder_Nema17.STL 88 KB
LCD_holder_side.STL 20 KB
Spool_holder.STL 32.9 KB
x_carriage_clamp.STL 8.3 KB
PSU_holder_rear.STL 46.1 KB
y_limit_switch.STL 36.6 KB
Frame_corner.STL 92.6 KB
part_cooling_fan_duct.STL 92.7 KB
Frame_middle.STL 135 KB
z_axis_platform_holder.STL 67.8 KB
Frame_stabilizer.STL 65.3 KB
Motor_mount_Nema14-17_r.STL 109.5 KB
z_axis_hex_adapter.STL 63.2 KB
Ramps_holder.STL 319 KB
y_carriage.STL 100.1 KB
Motor_mount_Nema14-17_l.STL 109.8 KB
y_carriage_endstop_trigger.STL 5.2 KB
Pulley_Nema17_15mm.STL 71.2 KB
z_axis_carriage.STL 172.2 KB
z_axis_top_mount.STL 103.6 KB
PSU_holder_front.STL 46.1 KB
z_axis_motor_mount.STL 102.2 KB
LCD_holder_bottom.STL 18.4 KB
x_carriage.STL 168.1 KB
Motor_mount_Nema17_r.STL 73.5 KB
Motor_mount_Nema17_tensioner.STL 26.7 KB
Motor_mount_Nema17_l.STL 73.5 KB
x_carriage_level.STL 175.9 KB
Motor_mount_Nema17_r.STL 73.5 KB
Motor_mount_Nema17_tensioner.STL 26.7 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora