Parametric clamp. Supplied as an OpenSCAD module, almost all dimensions can be changed.

Customisations include base (enabled / disabled with size parameters). Automatically spaced screw holes on the clamp jaws (enabled / disabled with diameters and optional nut recesses).

Full list of parameters in instructions.

1. Load design into OpenSCAD

2. Customise parameters as required.

Parameters: base : Enable / disable clamp base base_thickness : Thickness of clamp base if enabled base_width : Width of clamp base if enabled ring_thickness : Tickness of clamp ring ring_inner_dia : Inner diameter of clamp ring jaws_thickness : Thickness of clamp jaws jaws_width : Width of clamp jaws break_width : Width of break in clamp jaws screw_diameter : Screw hole diameter screw_count : Screw hole count nut_recess : Enable / disable nut recess in clamp nut_diameter : Nut recess diameter nut_thickness : Nut recess depth height : Clamp height

3. Export STL

4. Print! or if OpenSCAD isn't your thing import the STL into the CAD software of your choice for incorporation into another design.