Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
A cryptex with ten code rings of your choice.
Needed Parts: Sanding paper Super Glue
Printing: Print End_Plug_Lock.stl, End_Plug_Shaft.stl, 2 x End_Plug_Ornament.stl, Lock.stl, Lock_Ring.stl, Code_Ring_Shaft.stl and 10 code rings of your choice. Code_Ring_Shaft.stl could benefit of being printed in a stronger material then PLA. All parts can print without support if placed as the STL files suggests.
Assembly: Please test assemble without glue first, to ensure all parts goes together. Some grinding may (will) be needed....
- If the clicking, when turning the code rings seams a bit weak, carefully heat the springs on the Code_Ring_Shaft, and bend them a bit out.
- Glue 'End_Plug_Shaft' to 'Code_Ring_Shaft'.
- Mount the code rings on the 'Code_Ring_Shaft'.
- Glue 'Lock_Ring' to 'Code_Ring_Shaft'.
- Put the 'Lock' into 'Code_Ring_Shaft' and turn the rings.
- Place the 'End_Plug_Lock' on the table, and glue it to the 'Lock'.
- Glue the two 'End_Plug_Ornament' to the End_Plug's
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta