This a remix from JarodHiggins. I really like it but once I started to print it I realized it was a bit too small for my liking. So it's been beefed up just a bit. Overall it's 12 inches long and just over 7 inches high and just over 2 inches wide at all of its widest parts.

I added grips to the his model which also include the BPRD logo on them. I updated the bullets that come with this model as well. I added the words BPRD and 35mm on the bottom of the casing like an actual casing would have. I have a solid version and one that is hollowed out. This way you can use less material to print out and can add electronics to it.

Two of the bullet heads are hollowed out with tips. The idea behind those are the one with the solid bottom you can add liquid to and cap the top. You can add little bits to the head too like Hellboys garlic bullet from the movie. The one with the whole on the bottom as well is so you can insert a light source as well as liquid. Of course both would need to be printed with clear material. Not sure how well they will work out put I thought I'd try making them. There are other Bullet heads included as well so have fun with those too.

Just to make this thing a little more Con-friendly, I made a removable cap for he end of the barrel you can paint Orange. This way incase your state requires that.

I plan on printing this myself so if I need to make any changes, I'll update it and put a note in here. And as always, Have Fun with this!!!!

(This is just a prop and not an actual weapon.)

I don't know how i don't catch these things before i upload them. I had to enlarge the revolver a bit more. I noticed the pin was not a perfect circle and so i was not sure it would pivot open correctly to add the faux bullets. So it's only a little bit longer now. all the revolver parts were re-uploaded and the old taken out. What's up there now should work just fine. Thanks all.