Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D Modular Front Panel System por Jpeg13 no Thingiverse

Descrição

Before i got my 3D-Printer, i used to create Frontpanels with a Jigsaw. Lots of work, and it never was very accurate...

So, here is a version for 3D-Printers. You might want to modify to your needs, so i added some FreeCad files (*.FCStd)

I recomend Printer Setting of Layer 0,3-0,4, and 15% Infill..

You will need ALOT of screws... I use Countersunk screws 3,5 x 12 mm.

I just added modular case files.

Thingiverse

Modular Front Panel System

Jpeg13

8

Curtidas

0

Downloads

10

Coleções

Licença Creative Commons - Attribution - Share Alike

Arquivos (19)

Connector2.stl 43.1 KB

Connector1.stl 31.1 KB

PL_5A.stl 161.4 KB

Connector2x2.stl 86 KB

Connecto3x2.stl 55.2 KB

Connector3.stl 27.6 KB

PL_Plugs.stl 89.3 KB

PL_Switch.stl 75.9 KB

PL_40V.stl 143.4 KB

Mid_100x50.stl 79.3 KB

End_100x50.stl 60.5 KB

Mid_100x100.stl 90.4 KB

End_100x100.stl 78.5 KB

Corner_100x100.stl 92.8 KB

Corner_100x50_L.stl 63.1 KB

Corner_100x50_R.stl 63.1 KB

Rim_50x100.stl 72.9 KB

Rim_100x100.stl 102.6 KB

Plugholder.stl 38.9 KB

Ver no Thingiverse