This adjustable phone stand is one on of my fist projects with a 3D Printer. The design was kept as simple as possible. With a width of 80mm and a height of 90mm, this phone stand is also suitable for large moblie phones such as the IPhone 8 Plus.

Content list:

-Part-1_base.stl
-Part-2_grip.stl

and

-Part-3_Phone-stand.stl
-Part-4_Phone-stand-clip.stl

or

-Part-5_complete.stl

You need to assemble Part-3 & Part-4 - this way you can save a lot of support structure. If you choose the combination of Part-3 and Part-4 you have to pick up the right size of Part-4 and glue them together with superglue.

With my setup, Part-3 and Part-4-13.60_x_12.60.stl fit together perfectly.

You should take a look at the thickness of your Phone: Then you can choose from three different types of phone thicknesses: 10mm, 12mm and 15mm

What you need in addition: -M5 nut -M5 x 25 hex bolt

The M5 screw should have a length of at least 25mm.

Please share the result or leave a comment.

Hope you like it =)