Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Modelo 3D 737 Throttle quadrant por hein4bloed no Thingiverse

Descrição

Self designed 737 Throttle quadrant for use with flight Simulator and usage in a home cockpit. in combination with e.g. Mobiflight / Arduino and Leo Bodnars BUX Joystick-Button Box it is nearly fully functioning. With appropriate Servo and correct programming Mobiflight even the autothrottle function is possible and the throttle levers will move automatically if autopilot and autothrottle is activated.

For assembly please see the sketchup construction file.

Thingiverse

737 Throttle quadrant

457

Curtidas

0

Downloads

533

Coleções

3

Impressões

Licença Creative Commons - Attribution - Non-Commercial

Arquivos (88)

Abdeckung_Mitte.stl 206 KB

Cutoff_Abdeckleiste_oben.stl 129.1 KB

Abdeckung_R3.stl 436.7 KB

Flaps_Achsabstand_lang.stl 173.8 KB

Abdeckung_L3.stl 261.2 KB

Flaps_Achsabstand_kurz.stl 174.2 KB

Abdeckung_L1.stl 649.6 KB

Befestigung_HR.stl 325.2 KB

Abdeckung_L2_aussen.stl 674.1 KB

Cutoff_L_Knauf.stl 294 KB

Abdeckung_R2.stl 949.6 KB

Cutoff_R2.stl 269.2 KB

Cutoff_L1.stl 270.4 KB

Abdeckung_R1.stl 649 KB

Befestigung_VR.stl 408.9 KB

Abdeckung_L4.stl 622.3 KB

Befestigung_VL.stl 447.3 KB

Flaps_Hebel_Klammer.stl 8.3 KB

Abdeckung_L2_innen.stl 437 KB

Cutoff_Schalterhebel.stl 37 KB

Cutoff_L3.stl 229.1 KB

Flaps_Hebel.stl 190.1 KB

Cutoff_R3.stl 229.1 KB

Cutoff_R_Knauf.stl 299 KB

Cutoff_Ring.stl 147.3 KB

Flaps_Schieber_Ring.stl 56.9 KB

Flaps_Hebel_Schieber.stl 131.4 KB

Cutoff_L2.stl 270.9 KB

Befestigung_HL.stl 314.2 KB

Handgriff_Reverser_Schalter_L.stl 39.7 KB

Flaps_Graduation.stl 569.6 KB

Cutoff_R1.stl 272.2 KB

Flaps_Knauf.stl 452.6 KB

Handgriff_Reverser_R.stl 610 KB

Handgriff_Reverser_Schalter_R.stl 39.8 KB

Flaps_Zahnradhebel.stl 1 MB

Handgriff_Deckel_L.stl 304.6 KB

Horn_Cutout_Huelse.stl 97.7 KB

Horn_Cutout_Tasterhalter.stl 69.7 KB

Handgriff_Reverser_L.stl 608.6 KB

Horn_Cutout_Stoessel.stl 20.4 KB

Parking_Brake_Fuehrung.stl 33.6 KB

Horn_Cutout_Knopf.stl 289.1 KB

Parking_Brake_2.stl 42.1 KB

Handgriff_Basis_R.stl 1.1 MB

Handgriff_Basis_L.stl 1.1 MB

Parking_Brake_LED_Halter.stl 93.1 KB

Spoiler_Anschlag.stl 123.4 KB

Handgriff_Deckel_R.stl 304.9 KB

Parking_Brake_1.stl 143.1 KB

Spoiler_Graduation.stl 295.1 KB

Stab_Trim_Schalter_Sicherung_Klappe.stl 69.4 KB

Spoiler_Knauf.stl 153.8 KB

Parking_Brake_Light.stl 79.5 KB

Handgriff_Reverser.stl 608.3 KB

Servoplatte_L.stl 312.6 KB

Spoiler_Hebel.stl 140 KB

Stab_Trim_Schalter_Sicherung_Basis.stl 91.5 KB

Trim_Needle_Zeigerspitze.stl 10.3 KB

Horn_Cutout_Stoesselkopf.stl 63.8 KB

Flaps_Zahnrad_Poti.stl 816.5 KB

TOGA_Knopf.stl 85.5 KB

Trim_Wheel_Kurbel_Grifff.stl 177.3 KB

TOGA_Knopf_Ring.stl 57.6 KB

Trim_Wheel_Deckel.stl 260.6 KB

Trim_Wheel_Kurbel_Achshalter.stl 276.3 KB

Trim_Needle_Zeiger.stl 42.2 KB

Trim_Wheel_Rotary_Encoder_Platte.stl 90 KB

Trim_Wheel_Kurbel_Basis.stl 87.4 KB

Parking_Brake_3.stl 17 KB

Trim_Wheel_Kurbel_Spitze.stl 86.9 KB

Trim_Wheel_Rotary_Encoder_Basis.stl 132.9 KB

Servoplatte_R.stl 312.9 KB

Trim_Wheel_Kurbel_Scharnier.stl 276.3 KB

Trim_Wheel_Zahnrad_klein.stl 796.6 KB

VorderseiteR.stl 172.3 KB

THR_Hebel.stl 1004.6 KB

Trim_Wheel_Zahnrad_gross.stl 1 MB

ZR_Spoiler_Achse.stl 173 KB

ZR_TrimNeedle_Motor.stl 541.4 KB

ZR_Throttle_Poti.stl 789.5 KB

ZR_Spoiler_gross.stl 1 MB

Trim_Wheel_A.stl 1.9 MB

ZR_Throttle_Servo.stl 814.1 KB

ZR_Spoiler_Poti.stl 814.4 KB

VorderseiteL.stl 351.8 KB

ZR_TrimNeedle_gross.stl 1.1 MB

Trim_Wheel_B.stl 2 MB

Ver no Thingiverse

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.