Last Updated: 8/29/18

Raspberry Pi Zero W based MySensor controller/gateway with Long Range NRF24L01 + PA + LNA RF Transceiver.

Usage

Created with OpenSCAD

1. Print the 3 parts
2. Increase existing rPi Zero mounting holes to 3mm (e.g. drill them carefully)
3. Insert the Pi into the lower piece
4. Attach Long Range NRF24L01 + PA + LNA RF Transceiver to the insert (e.g. super glue)
5. Wire the radio (NRF24L01) to the rPI zero header
6. Press the insert onto the rPI zero
7. Install M3x25 screws through bottom, insert, and finally into the top
8. Configure MySensor gateway according to: https://www.mysensors.org/build/raspberry
9. Optional: Add controller code to rPI according to: https://www.mysensors.org/controller

Github: https://github.com/joliva/rpi_zero_mysensor_gateway