Made a remix of "Springy pen holder" https://www.thingiverse.com/thing:1926664. Made it so it fits the snapmaker. Also added quick screw heads for the snapmaker CNC screws to quickly be able to attatch and adjust the tightness of the pen holder. The springyness (flexibility) of the mount helps not to brake the pen and keep a even preasure when drawing. It can hold up to 15mm in diameter pens/pencils. I printed it in PLA+ (eSun) and it has a stiff but springy feel to it perfect to not break the pen or but any unnecessary strain on the snapmaker. I just took a svg file into snapmakerjs CNC g-code generator (2.4.3) and changed the parameters to the following: Carv path: On the path Target depth: 1mm Step down: 1mm Jog height: 3mm Stop height: 10mm

Jog speed: 4800 mm/min Work speed: 2400 mm/min Plunge speed: 600 mm/min

Then exported to g-code file and in the file i removed M3 and M5 commands so the CNC spindle do not start. Loaded it, found work origin and then pressed play. This way you can easily plot svg files with the CNC module attatched.

Recommended items needed: Tejp for holding the paper down (clips for textile or magnets if you have a metal plate)

2x M4 screws (minimum 20mm, I used 35mm)

Tip if you want updates or modifications