These upgrade parts for the "Woodpecker CNC 3018" and similar engraving machines (1610, 2418) are designed to add an adjustable laser alignment guide to make it easier to align the milling bit with the work piece without having the milling bit getting in the way.

Features:

• Adjustable
• Designed to fit 12 mm Ø laser diode modules.
• Slotted mount to allow adjustment in the x-axis.
• Tilts with locking screw to allow adjustment in the y-axis.
• Module can twist to allow it to be set square.
• Includes screw hole to securely clamp the module in place.

You will need: 2-part epoxy adhesive 2x M3 screws 1x M3 nut

You may need to open the module and add a new longer cable to reach back to your control board 5v+ port.

This is the laser module that I used: https://www.ebay.co.uk/itm/650nm-5mW-Red-Laser-Line-Module-Focus-Adjustable-Laser-Head-5V-ATF/192509051230

Printed on a heavily modified Anet A8.