AAT Mechanism for Eagle Eye FPV Ground Station

Update-4 on 18/09/2018:

Side Trays Upgrade Kit modified. Right side tray was engaging with tripod mount when rotation, (fixed).

Update-3 on 27/08/2018:

Side Trays Upgrade Kit modified. Holes for the lock pins shifted 6mm up for correct mounting.

Update-2 on 20/08/2018:

Side wall trays upgrade kit modified, lock slots on side walls shifted up by 6mm.

Update-1 on 16l08l2018:

Side wall trays for holding Rxs or Battery Packs. Stl file added.

Designed and Developed By: Filatech (www.fila-tech.com)

You will need:

1. 5Kg, 360 deg, Sail Winch Servo for Pan: https://www.banggood.com/ULTRA-5kg_Cm-4T-Plastic-Gears-Standard-Size-Sail-Winch-For-Rc-Yacht-SW4805-4PA-p-1027558.html?rmmds=myorder&cur_warehouse=CN
2. Any 5Kg, 180 deg Servo for Tilt
3. Eagle Eye FPV Ground Station with Plastic Case.
4. Eagle Tree Power Panel Display
5. 2 pcs of 5X20mm Steel Springs
6. 4 sets of 3x75mm bolt and nut. If you cant find such length, use full thread 3mm screw bar and cut it in proper length.
7. 3 sets of 3X55mm bolt and nut. If you cant find such length, use full thread 3mm screw bar and cut it in proper length.
8. 8mm Slipring, you may find it here: bolt and nut. If you cant find such length, use full thread 3mm screw bar and cut it in proper length. https://www.banggood.com/OD-8mm-8-Core-Micro-Conductive-Slipring-Collecting-Ring-Rotor-For-GBM4108H-120T-Gimbal-Motor-RC-Dron-p-1247135.html?rmmds=myorder&cur_warehouse=CN

Please check back for updates and upgrades.

Enjoy, and share your thoughts and comments please.