Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is a cutaway model of Turboprop Engine having following features for educational purpose. Features are: (1) Centrifugal (Impeller type) compressor (2) Can type Combustion Chamber (3) Axial Flow Turbine (4) Reduction gears and propeller shaft (5) Air inlet cowling with Oil Cooler Air Passage
Download files includes; -files: STL Files -images: STL File Figure and Index Picture for assembly Aid
Purchase Parts Information; -Bearings WBC6-12ZZ (6 x 12 x 4) 6ea - Assemble to outer holes of each Panel F686ZZ(6 x 1 3x 5) 2ea - Assemble to center of each Panel 689ZZ (9 x 17 x 5) 2ea - For LP and HP Impeller 6900ZZ (10 x 22 x 6) 2ea - For Prop-Shaft, Turbine Shaft
-Aluminum Tubes 9mm dia x Appox. 70mm - as Compressor Rotor Shaft (Make slots both ends) 6mm dia x Appox. 100mm - as Turbine to Compressor Coupling Shaft
-Screws Micro screws M1.4x3L - Appox. 70 ea - Direct screw-in to 1 mm dia hole (No nut), Head side flange hole is 1.5 mm dia. Screws M2 x 20L - 1ea - M2 Tap is used - Starter associate parts Screws M2 x 10L - Appox. 12ea - M2 Tap is used - Red. Gear Panels associate parts and IGV Screws M2 x 6L - Appox. 4ea - M2 Tap is used - Diffusers and Turb. Shaft Coupling
Assembly Points
- Rotors, Gear Train Set and Casings can be assembled and adjusted separately.
- Combustion Air Casing is slid to the outlet elbow assembly until aft end clears from the turbine case its bore at first. Then slide back to bore. Gluing is optional.
- Standard Skill (such as Drilling, Tapping, Filing, Tightening, Painting and Gluing etc) is needed and perseverance too.
Total Net Print Time: Approx. 50 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted.
[Update] 2018.8.13 This is the original design for the followings. Please refer them.
- Mod Parts : https://www.thingiverse.com/thing:2416610
- Mod Parts2 : https://www.thingiverse.com/thing:2747907
- Mod Parts3 : https://www.thingiverse.com/thing:2792220 [Update] 2018.8.22 Add "Assembly Charts" (pdf format) and figures are added to assist for assembly. [Update] 2018.9.4 Parts List including Mod-Parts and Identification of rotaing parts. [Update] 20180913 Add the optional part "Reduction-Panel03f" for "Reduction-Panel03" [Update] 20181025 Add "Mount-Foot101" called in "Assembly Charts" [Update] 20190907 I have prepared the detailed Assembly Manual as an option for those who want to build this engine with a small amount of money. Please browse if you are interested in this. https://cults3d.com/en/3d-model/tool/turboprop-engine-assembly-manual-option [Update]20200506 "Flange-Screw01" figure added about M1.4 Screw. [Update]20201018 Add "Shaft-Coupling 101.stl" having thicker wall.
