Stack of 3 3.5" floppy disks, with an opening cut out to hold a 2.42" OLED display. It's currently printing, soon as it's done I'll update with a picture. The idea is to sit it on top of the ST, and run the wires for the display through the top vents. I plan on adding 3 buttons as well, for + - and eject. I'm attempting to mount both the original floppy, and a de-cased Gotek internally, and have them be swappable via a hidden switch.

2.42" OLED I used: https://www.ebay.com/itm/132059553860

I've modified the top of the stack in the v2 file so that the metal 'door' section has a wider outline that's cut a bit deeper into the face. I've also adjusted the stack a bit in the hopes that the overhangs won't be quite as bad.

v3 has 3 button holes.

v4 Complete redesign, dimensions should be correct, opening for OLED should fit without enlargement. Cleaned up quite a bit as well. One has SONY MF2DD on the top, one is blank. Also went from 3 buttons down to 2. The SONY logo'ed may have issues printing due to the size.

The Atari logo version will likely be the final version of this (aside from possible tweaks to the button position), everything appears to fit, and it's printable without too much trouble.

I'm planning on using this with a smaller version of the Gotek board (47x46 mm) along with my existing floppy, and wire a switch to swap them as needed.

Mini board available here: https://www.sellmyretro.com/offer/details/32413