This is a mount for the Turbowing Cyclops v2 camera designed to fit the Gemini 2.5 frame (26mm spacing) or the MIB 2.5 frame (19mm spacing).

• The spacing of the holes is 26mm or 19mm, designed to line up with front standoffs on frame.
• The mount has 2 parts, top and bottom which screw together using m2x10mm screws. Choose the bottom that fits your frame, top is same regardless
• This mount fits the camera with a modified lens (m7 1.8mm 180 deg)
• The stock lens (120 degree) is longer and won't fit well inside this mount
• I used a zip tie to tension the camera rearward to reduce vibration (see photo)

UPDATE 7/23/18

• Modified the top piece to include a retaining strap for the SD card. This strap wraps around the back of the camera and secures to the other side using a small screw.
• Added a guard that fits on the side of the cyclops camera in front of the SD card. This guard should be glued into place and serves as a high point to prevent the SD card from ejecting in a crash.