Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Extra and changed parts for Hypercube Evolution. por fierland no Thingiverse

Descrição

In Progress i'm curently uploading all extra and changed parts for my HEVO build :-)

Finally sharing my Hypercube Evolution. Working on it for the past few months (and driving the mailman crazy with all packages from China :-) ). Made my first prints yesterday and almost satisfied with the result ....

Some details:

  • Duet3d on 24v
  • 2x Z-as motor (still driven on one driver)
  • e3d v6
  • Piezo element for z-probe
  • 8mm alu hotbed (300x300) with 220v Heater

Still a lot to do :-)

  • Organize all cables
  • upgrade to 2 separate Z-axis drivers and later to 3x z-axis
  • Move printbed 3cm to the front (Is now in the center but this means I lose y depth)
  • Enclosure with heater
  • dual v6 head (for support)
  • add duex2/5
  • Redesign printhead (is to big now with the extra piezo module)
  • reprint some parts (printed on a anet-a6).
  • filament sensor

But having lots of fun …..

Thingiverse

Extra and changed parts for Hypercube Evolution.

fierland fierland (abre em nova aba)
11
Curtidas
0
Downloads
30
Coleções
Tags
hypercube evolution
Licença Creative Commons - Attribution
Arquivos (25)
filement_monitor.stl 41.9 KB
Cam_Support.stl 36 KB
Z_Nut_Braket_-_Anti_Backlash_1.0_-_flag.stl 61.2 KB
fan_holer.stl 41.5 KB
USB_power_Holder.stl 19.2 KB
power_brace.stl 29.6 KB
USB_power_Holder.stl 19.2 KB
Power_Frame.stl 25.3 KB
X_End_Stop_Flag_1.0.stl 51.1 KB
Cover_Side.stl 52.2 KB
X_Carriage_10mm_rail.stl 485.6 KB
3030_Extrusion_-_EndCap_-2_blanks.stl 222.1 KB
z_cariage_alignment_aid.stl 21.2 KB
Z_Axis_Linear_Rail_Bracket_-_Left_2.0.stl 79.7 KB
Chain_Support.stl 70.4 KB
Z_Axis_Linear_Rail_Bracket_-_Double_Z_-_Left_2.0.stl 122.9 KB
Blank_Frame_2.0.stl 52.9 KB
Z_Motor_Mount_1.0_-_3Z_-_Front.stl 224.2 KB
Cam_Support_Long.stl 30.7 KB
Retainer-Dual.stl 71.8 KB
connectors.stl 110.4 KB
Z_Nut_Braket_-_Right_-_Anti_Backlash1.0.stl 85.8 KB
Z_Motor_Mount_1.0_-_3Z.stl 257.1 KB
Power_Frame_2.0.stl 185.4 KB
Z_Nut_Braket_-_Left-_Anti_Backlash1.0.stl 85.8 KB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora