Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D HyperCube Evolution - TW HEVO Edition por otaku521 no Thingiverse

Descrição

This is the built that I used for my 2 builds of HEVO which are remixed from many sources. It has everything from boards, gantries, brackets and everything for your conveniences. it has mounts for both Direct and Bowden as well! (Mounts based on Nedalive X standard carriage) X&Y Gantries: 10mm Rods - Using IGUS RJMP 10mm Rod: Carbon Solid Rods for X / Steel on Y Z Gantry: 12mm Rods - Using IGUS RJMP (Also version with LM12UU) 12mm Rod: Steel

Direct Drive - it is currently designed for Bondtech - Just mirror it for Titan v6/Aero BL Touch is available for v3 Direct Drive Mount or via Nedalive's rear BLtouch Mount For Bowden - there is Nedalive's bowden mount - I used rear mount when I was on Bowden

There is a version of the bed Motor T8 brackets that can be used for DuetWifi Auto Bed Leveling for either 3 or 4 Lead Screws!

Wanted to thank Tech2C, Scott3D, Nedalive, Tunnelvision and many others to make this possible!
(If you see something that I can add the remix by, please tell me.. I forgot as there are so many of you that inspired and helped me! Thank you!)

Next version - beginning to study MGN Rails

Update: 2018/5/4 - updated HEVO - Extruder - Direct Drive (Bondtech) (Mirror Aero) v3.1 with BL Touch - Cleaned it up a lil and strength the part Update: 2018/5/9 - updated HEVO - Beefed up Motor Plate (L+R Corners) v3 - it should work with regular bed setup with brackets Update: 2018/5/10 - updated:

  1. HEVO - Direct Drive - Generic Extruder - this direct drive should fit most 35mm and under motors (prefer 22mm pancake+10mm heat sink) - This should work for Titan+V6 / Titan Aero / Bondtech+V6
  2. HEVO - E3D v6 with 5015 Radial Fan WITH BL TOUCH - updated V6 hot end with 5015 Radial Fan with BL Touch (add 2mm spacer on top of the mount and BL Touch - approx 8mm clearance) (Left Hand and Right-Hand version - updated) a) Made 2 version: 24mm Motor (Pancake) and 36mm Motor (can use Pancake+Heatsink)

Update 2018/5/11 - Updated the Fan mount and fan duct to be used with Volcano Hot End

Update: 2018/5/12 - Updated Fan duct for volcano short 5015 fan

Update: 2018/5/16 - Updated HEVO - Beefup Motor Plate v3 Mini for smaller builds (200mm)

Update 2018/5/20 - Updated the HEVO - Z Motor Mount - v3.1 Mini - for smaller builds (200mm) - can be used for all sizes

Thingiverse

HyperCube Evolution - TW HEVO Edition

otaku521 otaku521 (abre em nova aba)
74
Curtidas
0
Downloads
157
Coleções
Tags
hevo HEVO Direct Mount hypercube evolution
Licença Creative Commons - Attribution
Arquivos (58)
XY_Carriage_Clamp_HCEvo_10mm_Bearing_v2.stl 62.3 KB
XY_Carriage_HCEvo_X10_Y10.stl 1.3 MB
Z_Nut_Braket_1.2.1_Ball_screw_1204.stl 161.2 KB
HEVO_-_Z_Upper_Rod_Holder_3.stl 114.6 KB
Z_Axis_Linear_Rail_Bracket_-_Right_1.0.stl 189.9 KB
Z_Axis_Linear_Rail_Bracket_-_Left_1.0.stl 189.9 KB
Z_STEPPER_MOUNT_v2.stl 86.8 KB
HEVO_-_Extruder_-_Direct_Drive_-_E3D_V6_5015_Radial_Fan_Duct_for_v1_v2.stl 45.2 KB
HEVO_-_Extruder_-_Side_loading_5015Fanduct_v2.stl 70.4 KB
HEVO_-_Extruder_-_Bowden_E3D_V6_Retainer_30mm_Fan.stl 126.7 KB
HEVO_-_Extruder_-_Bowden_E3D_V6_Retainer_No_Fan.stl 254.2 KB
HEVO_-_Extruder_-_Direct_Drive_Bondtech.stl 196.2 KB
HEVO_-_Extruder_-_Direct_Drive_Bondtech_Mirror_Aero_v2.stl 184.7 KB
HEVO_-_Extruder_-_Bowden_4010_Radial_Fan_Duct.stl 304.1 KB
HEVO_-_Extruder_-_Direct_Drive_-_E3D_v6_with_5015_Radial_Fan_for_v1v2.stl 361.3 KB
HEVO_-_Extruder_-_Direct_Drive_Bondtech_Mirror_Aero_v3_with_BL_Touch.stl 197.5 KB
HEVO_-_Extruder_-_Bowden_v6_Mod_4010_Radial_Fan_V2.stl 239.4 KB
Bed_Bracket_20_1.0.stl 247.1 KB
Bed_Bracket_25_1.0.stl 96.5 KB
Bed_Bracket_40_1.0.stl 207.7 KB
Bed_Bracket_15_1.0.stl 247.8 KB
Belt_Tensioner_v3.stl 49.1 KB
Bed_Bracket_30_1.0.stl 219.3 KB
Bed_Bracket_45_1.0.stl 201.4 KB
Belt_Clamp_v3.stl 132 KB
HEVO_-_Extruder_-_Bowden_Fan_Duct.stl 1.2 MB
HEVO_-_Extruder_-_Bowden_Mount_v3_STD_BL_Touch_for_Side.stl 1.5 MB
HEVO_-_Extruder_-_Bowden_Mount_v6_STD_BLTOUCH_in_Rear.stl 1.6 MB
X_Carriage_HCEvo_V2.2_LM10.stl 3.2 MB
HEVO_-_Nedalive_-_Rear_BL_Touch_Mount.stl 74.6 KB
60mm_Fan_Clip_for_MKS_Gen_L_Bracket_v2.stl 27.1 KB
HEVO_-_MKS_Gen-L_Bracket_Straight.stl 57.2 KB
3030_IEC_AC_Plug_Snap_On_Cover.stl 67.1 KB
HEVO_-_MKS_Mosfet_Single_Bracket.stl 127.5 KB
HEVO_-_X_Flag_extension.stl 34.9 KB
HEVO_-_10mm_Y_Stop_Flag_v2.stl 47.9 KB
HEVO_-_Y_stop_optical_sensor_holder.stl 117 KB
HEVO_-_Z_Carriage_-_Ultra_Short_for_IGUS_RJMP.stl 172.3 KB
Right_idler_mount_+corner_bracket.stl 393.8 KB
Left_stepper_motor_holder+corner_bracket.stl 731.9 KB
Right_stepper_motor_holder+corner_bracket.stl 778.2 KB
Left_idler_mount_+corner_bracket.stl 478.3 KB
HEVO_-_Z_Carriage_Bearing_LM12UU.stl 2.1 MB
HEVO_-_Beefed_up_Motor_Plate_L+R_Corners_v2.stl 130.5 KB
HEVO_-_Beefup_Motor_Plate_v2.stl 54.7 KB
HEVO_-_Extruder_-_Direct_Drive_Bondtech_Mirror_Aero_v3.1_with_BL_Touch.stl 188.2 KB
HEVO_-_Beefed_up_Motor_Plate_L+R_Corners_v3.stl 123.5 KB
HEVO_-_E3D_v6_with_5015_Radial_Fan_WITH_DC42_IR_PROBE_AND_BL_TOUCH_LH.stl 391.1 KB
HEVO_-_E3D_v6_with_5015_Radial_Fan_WITH_DC42_IR_PROBE_AND_BL_TOUCH_RH.stl 365.2 KB
HEVO_-_Direct_Drive_-_Generic_Extruder_24mm_Motor.stl 130 KB
HEVO_-_Direct_Drive_-_Generic_Extruder_36mm_Motor.stl 130.4 KB
HEVO_-_E3D_volcano_FANDUCT_with_5015_Radial_Fan_WITH_DC42_IR_PROBE_AND_BL_TOUCH.stl 34.4 KB
HEVO_-_E3D_volcano_with_5015_Radial_Fan_WITH_BL_TOUCH_LH.stl 246.8 KB
HEVO_-_E3D_volcano_with_5015_Radial_Fan_WITH_BL_TOUCH_RH.stl 233.9 KB
HEVO_-_E3D_volcano_FANDUCT_with_5015_Radial_Fan_WITH_BL_TOUCH_v2.stl 34.8 KB
HEVO_-_Beefup_Motor_Plate_v3_Mini.stl 36.1 KB
HEVO_-_Z_Carriage_Bearing_LM12LUU.stl 203.8 KB
HEVO_-_Z_Motor_Mount_-_v3.1_Mini.stl 82.8 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora