06.04.2018 Update 2: I made some washers as Dummys for Sorbothane. You ll need 8 pieces of that. It s purely for placing the lower parts correclty on your surface and be able to shift the printer around. So after setup and bolting down the lower parts they are basically useless. Print them as whimsiy as you like. 10 % Infill and 2 parameters will do nicely.

Update 1: It was pointed out that i made a mistake and the upper parts did interfere with a screw. Therefore i uploaded a new version of it. If you find any other mistake please inform me.

This is my version of feet for the Prusa MK2S Bear Upgrade. They are supposed to be used in conjunction with some Sorbothane Cylinders. This should reduce vibration/resonance/noise a bit. Part number of the Sorbothane feet is: 0531050-30-10

Upper parts are not symmetrical. You have print two of each version. The upper parts are supposed to be held to the frame with only 1 screw.

The lower parts can be bolted down with countersunk screws in two places each.

Added files for Fusion 360 and IGS-File if you want to change anything on it.