Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Remix of https://www.thingiverse.com/thing:1356367
A Colt Walker replica / prop. Cylinder can turn. Hammer and trigger move and can be made to work if you add some kind of spring yourself:unfortunately I do not have pics how I did it.
This is a remix because I had lots of difficulties with the original. Parts were askew in space and I was not able, with my limited knowledge to set them orthogonal, and split them so I could print them as I wanted them to print.
Some parts were split for easy printing. For instance:
- Colt_Walker_Revolver_03 needs to be printed 2 times, one time normally, and one time as mirror image, then glued together.
- Colt_Walker_Revolver_09 is made out of three parts which need to be glued together. There are three alignment holes (dia=1.75) for easier fitting them together.
Remark: Colt_Walker_Revolver_14 is not missing, it just isn't needed.
Print at 0.2 layer height, or even 0.1 layer height for the smaller parts. Use support were necessary. Mostly it is not necessary.
Most parts can be printed with 30% infill. Wall thickness: 1.2mm.
Sand the parts, and user spray filler to make them smooth. Sand and spray until you are satisfied with the result. I used an airbrush with modelling paint to paint thet black and brass color. Use a dry brush with silver paint to highlight the edges.
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta