EDIT 6/6/18 - Added file: Camera Mount V2 - Has a groove to allow the D-ring tripod screw to be fixed to the mount with an E-clip Added files: Large Diffuser Lid Part A and B - Simple Lid to fit the larger diffuser housing only, two piece design that needs to be glued together.

In addition to the 3D files here you'll need: 5x M10x25mm screws for the larger diffuser, I used Nylon. Or: 3xM10x25mm screws for the smaller housing. 1x 1/4" D-ring tripod screw.

I've included file for printable M10 thumb screw ends.

Optional: Mylar tape for lining the inside of the housing. Additional diffusion material of your choice. Velcro or similar for mounting additional diffusion material. Rubber non-slip tape for lining the camera mount.

The diffuser itself needs to be printed in a transparent material, I used a standard transparent ABS. Two size options available, the larger diffuser attaches to the large housing via 2x M10 screws, the smaller diffuser must be glued to the small housing.

The rest of the components were printed in either a high strength ABS or an ASA.

The Camera mount has an Arca-Swiss mount, so can be easily mounted to a compatible tripod head.

Threaded spacer is optional, having that extra space does improve diffusion at the cost of some light.

Suggest printing components with threads at maximum strength possible.