Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
The goal was the right side. 1kG I tried to print designs with thingiverse. Neither one allows to put the coil D190d52L82, from the right and left side. I had to create my own model. FDM Plast COIL
Left D210mm d52 L102, ABS density 70%, stantart res, brim, substrate Left D205mm d52 L82, ABS density 70%, stantart res, brim, substrate Right D195mm d52 L82, ABS density 70%, stantart res, brim, substrate Spindle ABS density 95%, high res, brim, substrate Bearing PLA high resolution, density 20% Bearing V2 ABS 20%, high res, bed 115, head 240C, brim,wall, FAN on, substrate
this is the maximum size. do not put more inside the printer! with the right 190mm vertically. ~ +5mm from the left 200mm vertically. ~ +5mm from the left 210mm vertically. ~ +3mm
Racks only from ABS! The PLA begins to sag when heated. The coil is heavy and the PLA is deformed
The balls at the bearing Dreamer_Bearing_V2 are glued. This is normal. Even with all the requirements. Gently push them out and tear them from the outer circle. Grind by hand. After running in, drip the silicone oil. For grinding I used toothpaste. Use a paper clip for the brake. Otherwise, the bearing will be races
There will be a nut with a handle. this without bearing
On the left side a model with a spindle 102mm is drawn. New models will be added. The project is not yet complete.
Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.
Criar conta