This design is for a Turnbuckle mount. designed for 5/16 turnbuckle. This design was used to provide extra stability to Z axis/gantry. I installed 4 braces with 4 turn buckles, and had experience a significant reduction in vibration and ringing in xyz calibration cube after installation.

requires: 1 - 5/16 turnbuckle with hook and eye hook ends per brace 1 - 5/16 Nut per brace 2 - M5 x 10 mm per brace 2 M5 2020 series drop in T nuts per brace use 5/16 threaded rod cut to necessary length.