Case for Raspberry Pi. Derived from http://www.thingiverse.com/thing:24945 but with dimensions that fit my Raspbery Pi more accurately. Wanted to clarify- there were several things I modified:

1. Merged lincomatic's version with latest from Hans.
2. Made the micro USB power connector hole about millimeter taller- otherwise it didn't quite fit.
3. Shaved 0.5mm off from wall which is next to GPIO hole- otherwise it did not fit next to GPIO pins (the pins themselves did fit, but pins have a wider base).
4. also, moved SD card hole a bit. Card reader was in a way of case otherwise.
5. Made the case mating walls longer- otherwise they break too easy.

I'm planning to add two things to this case:

1. Some mechanism to better lock top and bottom together. I'm thinking of simple 0.5-1mm bits on outside of bottom wall and identical holes on the inside of top walls.
2. Vesa mounts.