Here is a simple way to display 4x6 or 5x7 photos. The frame is hidden behind the photo so the photo seems to float without the distraction of a visible frame. The set of files includes 4x6L and 5x7L for stand up landscape, 4x6Pand 5x7P for stand up portrait, 4x6W and 5x7W for wall mount. Also there are files for an optional 'tree' that can support 3 4x6" W frames in portrait or landscape orientation.

The Wall mount can be used in portrait or landscape orientation. A common push-pin will just fit between the frame tab and the picture. To mount, push on the picture and the force will be carried through to the pin.

Pictures can be mounted to the frame with double face tape or with the small clips. To use the clips, put the picture face down on a table with one edge extending off the edge of the table. Position the frame on top, hold down firmly, and slide the clips over the edge of frame and picture.

The display tree is optional way to display the pictures. It has 4 parts; all parts are sized to fit within a 7.5x7.5" (190x190mm) square because that is the biggest many printers can make. The upper and lower parts are connected by a splice plate with the intention that the pieces be glued together. Frames are mounted to the tree with screws.