It consist of 3 parts:

• Base
• Case
• Button

Additional items needed (or similar alternatives):

• Soldering iron and some solder wire
• Electronics glue Link Here on Amazon
• (optional) hot glue through a hot glue gun
• 0.14mm2 red and black wire to connect the button.

This is for mounting 6x6x3mm tactile button switches.

When i assemble this i mount the switch into the case and bend 2 of the legs inwards. I solder 2 wires to the button ends, push the wires through the base and add a drop of glue to the base edges and fit the case in. Afterwards i put a drop of glue on the button's top and put the 3d printed button in the case. Optionally some hot glue can be added in the inside at the wires for a bit more strength but i think its not really needed.