How do you like my coffee table? :-) Print 4 legs, get a suitable piece of wood and you can have one too! In the process you will become King of Retract!

It's about 200mm tall because that is the limit of my printer in z-direction. If yours is bigger, you could scale it a little taller! I glued mine to the table board with double sided tape, but there are 4 through-holes included in the design if you want to screw the legs on instead.

I printed this in black PETG (shiny!), but it should work great in any reasonably stiff material (e.g. ABS/PLA/...). If you have time you can make it super pretty and print at 0.1 mm layer height, but mine is 0.25 mm and still took around 11 hours per leg with a 0.35mm nozzle at 25% infill. Use a brim if necessary to help with bed adhesion, depending on your printer setup.

A great place to put things! Max load I have tested was about 15 kg. Cheers!