Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Maker Mining Rig por bytestrome no Thingiverse

Descrição

The GPU mining rig design uses 20x20 aluminum extrusion. One rig needs 6x 480mm and 10x 320 mm extrusions.

Slic3r settings for the 3d printed parts below.

GPU mount: layer: 0.1 mm filament: PLA perimeters: 10 top layers: 10 bottom layers: 10 infill: 30%

L-joint: layer: 0.2 mm filament: PLA perimeters: 10 top layers: 5 bottom layers: 5 infill: 30%

L-joint bottom: layer: 0.2 mm filament: PLA perimeters: 10 top layers: 5 bottom layers: 5 infill: 30%

L-joint top: layer: 0.2 mm filament: PLA perimeters: 10 top layers: 5 bottom layers: 5 infill: 30%

PSU mount front/back/middle: layer: 0.2 mm filament: PLA perimeters: 10 top layers: 5 bottom layers: 5 infill: 30%

Switch mount/stopper: layer: 0.1 mm filament: PLA perimeters: 10 top layers: 10 bottom layers: 10 infill: 30%

T-joint: layer: 0.2 mm filament: PLA perimeters: 10 top layers: 5 bottom layers: 5 infill: 30%

T-slot nut 1/2/3 holes: layer: 0.1 mm filament: PLA perimeters: 10 top layers: 10 bottom layers: 10 infill: 30%

T-slot nut w/ fan mount: layer: 0.1 mm filament: PLA perimeters: 10 top layers: 10 bottom layers: 10 infill: 30%

Thingiverse

Maker Mining Rig

bytestrome bytestrome (abre em nova aba)
131
Curtidas
0
Downloads
203
Coleções
Tags
diy mining rig gpu mining mining rig
Licença Creative Commons - Attribution - Non-Commercial - No Derivatives
Arquivos (24)
gpu-support-2-holes.stl 727.4 KB
l-joint-caster-wheel-2.stl 890.2 KB
cable-hook.stl 562.7 KB
l-joint.stl 621.3 KB
l-joint-top.stl 501.9 KB
l-joint-bottom.stl 500.2 KB
gpu-mount-2-holes.stl 401.7 KB
psu-mount-front-right.stl 588.3 KB
psu-mount-back-left.stl 598.6 KB
stub-plate-2-holes.stl 250.6 KB
t-slot-nut-fan-mount.stl 95.5 KB
t-slot-nut-2-holes.stl 146.2 KB
psu-mount-middle-right.stl 585.3 KB
psu-mount-front-left.stl 598.6 KB
t-joint.stl 628.8 KB
t-slot-nut-3-holes.stl 217.2 KB
stub-plate-switch-stopper.stl 136.3 KB
t-slot-nut-2-holes-gpu-mount.stl 146.1 KB
psu-mount-middle-left.stl 595.5 KB
stub-plate-3-holes.stl 375.9 KB
t-slot-nut-1-hole.stl 75 KB
psu-mount-back-right.stl 589.5 KB
stub-plate-switch-mount.stl 284.3 KB
t-slot-nut-fan-mount-2.stl 107 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora