Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Alien Queen (WIP) por dazzadazzadazzadazza no Thingiverse

Descrição

Alien Queen in lots of detail. Currently being hacked down to manageable chunks.

Model will be 300mm high total.

Work in progress, correcting holes, manifolds and breaking down.

Thanks jon4tina noting the teeth and post prep wit removing the supports. Now opened up the front head in order work on this section easier.

Model parts list...

  1. Head Rear. Options:1 part OR a,b,c and d.
  2. Front head. Options: 1 part OR head split a and b, OR Jaw, Side plates, front, middle(see pic for infostructions)
  3. Tongue biter (no idea what the correct name is)
  4. Tail a
  5. Tail b
  6. Tail c
  7. Tail d
  8. Tail e
  9. Right arm
  10. Left arm
  11. Right leg. Optional 1part or 3 parts a, b and c.
  12. Left leg a
  13. Left leg b
  14. Chest arm left
  15. Chest arm right
  16. Torso front
  17. Torso rear
  18. Torso middle

Once all parts created i will be printing this asap. You are welcome to try and beat me to it : )

10% infill, 4 layer shell (1.6mm), .2mm layers. Supports required in most places apart from -Head rear, -Tongue biter, -Left leg B. All else will need supports for anything over 85 degree angle and if possible slap in the support to model spacing of 1mm for ease of removal.

Thingiverse

Alien Queen (WIP)

dazzadazzadazzadazza dazzadazzadazzadazza (abre em nova aba)
1,327
Curtidas
0
Downloads
1,421
Coleções
16
Impressões
Licença Creative Commons - Attribution
Arquivos (31)
left_leg_b_300mm.stl 9.3 MB
tail_a_300mm.stl 6.6 MB
tail_b_300mm.stl 6.8 MB
tail_c_300mm.stl 11.2 MB
tail_d_300mm.stl 8.6 MB
tail_e_300mm.stl 3.3 MB
Tongue_Biter_300mm.stl 1.1 MB
right_leg_300mm.stl 17.6 MB
left_leg_a_300mm.stl 5.6 MB
torso_front_300mm.stl 17.2 MB
torso_middle_300mm.stl 9.5 MB
torso_rear_300mm.stl 16.4 MB
head_split_a_300mm.stl 24 MB
head_split_b_300mm.stl 24.5 MB
head_front_300mm.stl 47.6 MB
head_rear_300mm.stl 26.3 MB
left_chest_arm_300mm.stl 3 MB
right_chest_arm_300mm.stl 3.1 MB
left_arm_300mm.stl 11.3 MB
right_arm_300mm.stl 12.4 MB
head_rear_a_300mm.stl 4.7 MB
head_rear_b_300mm.stl 4.8 MB
head_rear_c_300mm.stl 9 MB
head_rear_d_300mm.stl 9.2 MB
head_front_jaw_plates_300mm.stl 3.6 MB
head_front_jaw300mm.stl 7.4 MB
head_front_300mm.stl 17 MB
head_middle_300mm.stl 24.2 MB
right_leg_300mm-a.stl 5.6 MB
right_leg_300mm-c.stl 7.4 MB
right_leg_300mm-b.stl 5 MB
Ver no Thingiverse (abre em nova aba)

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta
Comparar agora