Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
This is the version of MPCNC using bolts and nuts found in Russian or European stores. Original MPCNC (25mm O.D.) was rebuilt for using:
- Allen M3/M4/M5 bolts and metrical nuts instead of #6-32 US screws.
- Allen M8 bolts (just for original visual look).
New hardware has been built twice and seem to work good. Great thanks to Allted for great piece of hardware.
Changed parts:
F-XY - added grooves to hide half of allen bolt head. F-Roller - nut window resized to M4. F-RollerM - mirrored version.
Some others are in progress. Till now they should be drilled to 4mm using pliers on assembly.
Original BOM found here (new bolts section follows): https://www.vicious1.com/blog/parts/
New hardware needed section:
Allen bolts:
- M8x130 - 1 pcs. (no change)
- M8x65 - 12 pcs. (60-70 allowed)
- M8x40 - 2 pcs. (35-45 allowed)
- M8x30 - 28 pcs.
- M3x10 - 19 pcs.
- M4x20 - 43 pcs.
Nuts: 7. M8 Nylock nuts - 43 pcs. 9. M4 Nylock nuts - 43 pcs. 10. M8x25 nut - 1 pcs.
Other: 11. M8 lead screw (no change). 12. Original pineapple coupler is too bad under heavy load. Replace it with standard 3D 5x8 coupler used in most 3D printers (or polyurethane insert version).
ChangeLog:
10.01.2018 First uploaded.
Russian translation follow!
В оригинальном MPCNC используются винты, которые найти в России невозможно. Это вызывает определенные проблемы при сборке. В данной версии все винты заменены на болты с внутренним шестигранником M3/M4/M8.
