This is a full running iteration of my BBR pancar based loosely around the S280 pan car based on the Serpent S240. A modified design was created by Ivan Martin found here _ http://myprotorc.blogspot.it/?m=1. His design took the S240 and shrunk it down to 102mm wheel base for use along side the Kyosho Mini-z. Ivan shared his files with me so I could modify it for my own personal use which I've uploaded here. My design was made with Tinkercad.

The top plate is connected using the spacers from a stand-off kit found on Amazon. All of the wholes found on the underside of the baseplate are countersunk and I used various length countersunk machine screws listed below. The steering knuckles are stock MR-03 knuckles. The mid-mount motor mount is from the Kyosho Mini-Z LM series and the differential is from PN Racing. The body and nose clip are for the TRP Mosler. The wheels are Kyosho 0 offset alloy wheels. The front lip is a trim to fit or may need to be completely trimmed off for certain bodies. NOTE: The nose clip mounting holes are designed around the PN Racing Carbon Fiber Adapter (CPxxx) http://www.kenonhobby.com/PN-Racing-Mini-Z-Mosler-MT900-Carbon-Fiber-Adapter_p_42798.html. Any adapter should work along with ride height spacers.

Parts List - Wheels base can be adjusted us Kyosho MR-03 MM and RM T-Plates 0 8mm Narrow wheels(Front) 0 or +1 11mm Wheels(Rear) MR-02 King Pins and C-Clips Kyosho MR-03 Steering Knuckles Kyosho MR-03 Stock Springs DS-919MG Servo Amazon LU-CC 180Pcs M2 Black Nylon Spacers Hex Nut Screw Stand-off Plastic Accessories Assortment Kit Amazon 304HC Stainless Steel Hex Countersunk Flat Bolts Screws M2x5mm Any Kyosho compatible Mini-z Motor Mount Any Kyosho compatible MR-02/03 Bearing Set Damper disks and springs Various Machine thread 2mm Screws from MR-02/03 Stock Kits UMX Timber Upgrade Lipo Batteries 7.4v 300mAh 35C High Performance All of my progress and projects can be found on my Facebook page- https://www.facebook.com/byebyeracing/