You ever look at the cubicle wall and wonder if you can add a shelf to those uprights between the wall panels? If your cubicle is based on the holes being 1 inch apart, this should fit. To measure the hole spacing, measure from the top of one hole to the top of the next hole. If that's 1 inch, this should hook in. The bracket is about 6" deep and 6" tall. The spacing from the front of the upright to the face of the cubicle for this bracket is set at 7/8". If your cube has a different measurement, you can try this, but I would recommend remixing it to whatever depth you need so the bracket is snug against the cubicle face.

PLEASE NOTE - I have not load tested these. They are sturdy, but keep in mind, they are after all, made from plastic. I would not put more than a few pounds per bracket. (Don't use for book shelves). These are good for displaying small things on lightweight shelves. If someone wants to load test these to see how much they can hold, I would be very interested to hear how they hold up.

Happy printing!