Gun wall hook with Colt logo. 2 files available: inset or outset logo.

Print two hooks. Before mounting use your gun to get accurate spacing between hooks and then make sure they are level. Mounting to wall studs will improve sturdiness. Use two small screws to mount each hook to the wall. To prevent marring your weapons finish, line inside the hook with 1" foam rubber weatherstrip tape.

This is my first useful design, it is not perfect but functional. Screw holes are a bit tight for wood screws but they worked out for me. Enlarging the print 1-2% would help.

SEEK TRAINING AND UNDERSTAND GUN SAFETY BEFORE TOUCHING A GUN!

DO NOT USE A LOADED GUN TO ASSIST WITH INSTALLATION. BE SAFE.

NEVER HANG A LOADED GUN ON THE WALL.

DO NOT MAKE GUNS ACCESSIBLE TO CHILDREN OR UNTRAINED PEOPLE.

This design is not created or endorsed by Colt.