These console risers are intended to lift an original Xbox one safely above a Playstation 4. When your entertainment center is crunched for space, placing the PS4 on top of the Xbox one may seem like the obvious solution...WREHNG! Most of the air vents on the Xbox are directly on top and blocking those is begging for you console to overheat.

The inverse (Xbox on top of PS4) isn't the most stable of stacking situations. So, the Xbox risers are simple solution to a simple problem.

A complete set of risers are: (2) XBRiser_BL (2) XBRiser_BR

RISERS SHOULD BE PRINTED LAYING DOWN (FLAT SIDE DOWN YO!) FOR BEST RESULTS

They aren't a super tight fit because they were designed to accomadate Large Command Poster Strips. All you need to do is trim the Command Strip removal tab with scissors (Blasphemy!) and adhere them to the cutout of the riser and then adhere them to the Xbox One so they don't slip around (PLA slick brah!)

-The risers on the right side of the console affix to the inside of the rubber bumpers. -The left rear riser affixes to the inside of the bumper. -The left front riser affixes right near the opening for the side USB port.

Designed using OnShape.

Happy printing and please share any makes!