Modular Arm System

Designed parametrically to automatically scales to support any arm size and is rock solid and does not flex, with no movement at the joints. This one is designed for M6 20mm cap head screws and captive M6 Nyloc nuts. There is a camera mount for an Eken H9R included.

STL's include:

30mm Arm 60mm Arm Direction change knuckle Base mount (designed for M5 cap head screws)

Print Settings:

Designed for:

0.2mm Layer Height 40% infill 3 top, 3 bottom and 2 perimeters Use supports as necessary to ensure hole tolerances for overhangs.