This is a piece of work in progress!!

Currently I'm working on the suspension.

See instructions for how to print.

This will eventually evolve into a fully functional model car, which can be equipped with a dc motor and an antenna for RC. The aim of the project is to have as many printable parts as possible, and for all parts to be parameteric and written in OpenSCAD.

Development repository at;
https://bitbucket.org/skeen/functional-model-car

TODO: Bolts for the universal_joint_ball

In order to assemble the suspension, you'll need to print;

• 2x bearing_arm_fitting.stl
• 4x bearing_arm.stl
• 1x center_frame.stl
• 2x center_frame_side_mount_arm_bearing.stl
• 1x center_frame_top_mount.stl
• 2x connector.stl
• 4x M8_50_bolt.stl (frame_side mounts)
• 2x M8_20_bolt.stl (frame_top mounts)
• 6x M8_nut.stl
• 4x M6_35_bolt.stl (bearing_arm mounts)
• 4x M6_nut.stl (bearing_arm mounts)
• 4x universal_joint_ball.stl
• 2x adapted_universal_joint.stl
• 2x double_universal_joint.stl
• 2x shaft_universal_joint.stl
• 2x M3_16_bolt.stl (adapter joint mounts)
• 2x M3_nuts.stl (adapter joint mounts)
• 2x wheel.stl
• 2x M3_20_bolt.stl (wheel/shaft mounts)
• 4x M3_nuts.stl (wheel/shaft mounts)

Note; The ISO threads can obviously be replaced by non-printed parts.

For the differential;

• 1x side.stl
• 1x Casing.stl
• 3x Side_Gear.stl
• 3x Shaft.stl
• 1x Spider_Shaft.stl
• 1x Input_Pinion.stl
• 6x M3 x 16 (M3_16_bolt.stl can be printed)