I wanted to Make a backgammon set for my parents because they like the game.

Opened, the board is 390 x 340 x 30 mm. Closed it is 190 x 340 x 60 mm. (Not including hinge or clasp protrusion)

I made the triangular patterns differentiated and raised to so they can be seen even without a multi-colored board, or easy painting if that's what you want to do.

Pips can be stored in the troughs near the hinges.

Assemble per the color coded pictures. I forgot to place the hinge barrel pin for the pics. (Hint: it goes in the hinge)

All parts print without supports except the hinges and quadrants (Rounded Bottoms).

Should be pretty strong with the connector plate pins, but I will also be using super glue.

Connector Plates and hinges designed with zero tolerance because I'd rather sand for a tight fit than try to predict expansion/contraction for everyone's print settings/filaments.

The pins are also designed with zero tolerance for a tight fit. No sanding should be required.

Quadrant 1 x 2 Quadrant 2 x 2 Connector Plate x 2 Hinge Part 1 x 2 Hinge Part 2 x 2 Hinge Barrel Pin x 2 Clasp x 2

Hinge and Clasp Pin X 12 Connector Plate Pin x 12

Pip x 30

Please post pics if you print/remix.