Score board / score tracker with 8x8 grid. The pins fit inside the board holes but can also be stacked on top of each other. The board was originally created for Sushi Go. It is is less than 9cm wide and only a few mm tall, allowing it to fit inside the game box.

Due to the small size and making them stackable, the pins are a bit hard to manipulate. When space is not at a premium you might want to use something bigger, e.g. use colored M&Ms as score markers on this board.

Printed on a Sindoh DP200 set to 0.1mm layer height and 15% infill. To save some filament I'd recommend only using 2 solid layers on top and bottom for the board.