Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Print these simple clips to securely hold plexiglass windows to your MakerBot.
Instruções
- Open .stl file in ReplicatorG.
- Rotate so all 6 clips are parallel to print surface.
- Move to platform and center.
- Generate GCode. Use settings with Right Extruder, 230* nozzle, 10% infill, 1 border layer, 40 feed rate.
-
Print. It should take ~45 minutes.
-
Cut 3/16" thick Plexiglass windows 1/8" smaller than side openings (1/8" air border all around).
-
Install clips. One clip centered on the top of each, two on the bottom corners. Installation may require moving bottom clips to one corner, then sliding them into desired positions.
4
Curtidas
0
Downloads
11
Coleções
Tags
accessories
clear
clips
MakerBot window clips
plexiglass
side
upgrade
window
Licença
Creative Commons - Public Domain Dedication