An adjustable Endstop for the Hypercube Evolution as single Z-axis version.

For everybody who does not want to use a z-probe or wants additional safety while homing.

Can be used as min and max endstop.

The Clamp sits very tight if you clean the rod from grease and oil before you mount it. No need to be afraid that it slides by accident.

Cut an M3 thread into the clamp if you have a thread cutter... And if you don't have one, simply screw the bolt a few times unstill it turns easy enough.

1x mechanical endstop v1.2

https://www.banggood.com/Mechanical-End-Stop-Endstop-Limit-Switch-With-Cable-For-CNC-3D-Printer-RAMPS-1_4-p-1067211.html?rmmds=search

1x M5 sliding nut for 2020 extrusion nut 6

https://www.banggood.com/50pcs-M5-T-Sliding-Nut-Zin-Plated-Carbon-Steel-T-Sliding-Nut-for-2020-Aluminum-Profile-p-1048439.html?rmmds=search

1x M5x10 round head blots 2x M3x25 cylinder head bolts 2x M3x5 cylinder head bolts 1x M3x30 cylinder head bolt 4x M3 nut