I modelled this on Ubermeister's Beer Bottle Stein Holder, which I printed early January, The one and only problem I had with it was the very thin neck support holding the bottle. I found that when printing, the neck tended to miss align so that the material didn't adhere very well and was quite weak. I remodelled this with Inventor 2014, after several trials came up with a quite solid and strong print. Get your BBQ's ready for summer and start printing. Finally figured that Autodesk Inventor was exporting the STL file in CM not MM so it's 10x smaller than it should be.
New Version added with more clearance between handle and bottle for those with chunky fingers.
Please add comments if you have made one to let me know what you think, thanks ScottyLad

The handle prints in 2 parts, I am using a Makerbot Replicator 2X with 110° plate and 235° extruder temp. I have also tried to make the joints stronger by using 3 wall thickness's although it does print well with 2 and 15% fill.

Hi Scotty, Sorry new to this and not sure how/why it imports it so small, I did model it in MM and tend to find that if I scale it to 1015% it prints full size and allows for shrinkage. (Inventor exported in cm not mm, corrected with L-Handle version)

Also if you print the text 6mm from the bed it should be the right
height. Hope it turns out ok.

Large Handle version Added (L-Handle) Std Text.stl can also be used with this model.