Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Modelo 3D Joystick por JobSmolders no Thingiverse

Descrição

This is a joystick concept I have been playing with for a while. :-) It is based on 3 potentiometers and an Arduino Nano. I have tested it and it works very well. :-) In the pictures I also added rubber bands to force it to the center. The glue holds the rubber bands in place. Yes, it’s not a delicate solution, but it works. :-)

I also added a photo of a test with a drawing arm. I invented a very difficult way of drawing. :-)

You also need: 4X Bearing 624ZZ (diameter 13mm, thickness 5mm, hole 4mm) 1x Bearing 635 (diameter 19mm, thickness 6mm, hole 5mm) 6x M4x20mm and 6 nuts 4x M3x20mm and 4 nuts 2X M3x10mm and 2 nuts 3x potentiometers (B1 P160KN3K) I used 50K Ohm because I had those. See print screen for dimensions

Printed in PET-G, 0.2mm resolution

Thingiverse

Joystick

JobSmolders

258

Curtidas

0

Downloads

298

Coleções