You can also see this project on my Wiki - http://www.itsqv.com/QVM/index.php?title=RunCam_Split_Camera_Case.

I also have a v2 case which you can see here- https://www.thingiverse.com/thing:2721510

UPDATE - 4 October, 2017 I added two additional versions of the bottom shell that move the camera forward and down with respect to the case. NOTE:You may have to use the extended cable on #52086.

This simple case is designed to protect the Runcam Split PCB and provide a place to fasten the Camera bracket. It also has a snap-in cover for easily changing out the Micro SD card. All cables and pushbuttons are accessible.

I recommend printing in ABS as it is UV tolerant and for best results use a fine 0.1mm resolution. The lower half mount holes as well as the two holes for the camera bracket are sized to 2.55mm to accomodate an M3 tap. To put it all together, use four M3 x 10mm and two M3 x 6mm nylon screws.

For best results in mounting, use gel sticky pad like Align PU Gel and rubber bands. You could also use good quality servo tape. Try and avoid velcro or dual lock as these have a tendancy to amplify any vibration and cause image problems.

To see options for Pan and Tilt configurations using the RunCam Split, please see my Pan and Tilt Parts Catalog here - http://www.itsqv.com/QVM/index.php?title=Parts_Catalog_-_Pan_and_Tilt_Parts