Ir para conteúdo
3DFinder
Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este
Modelo 3D Ford Flat Head V8 Working Model Engine por ericthepoolboy no Thingiverse

Descrição

Model and instructions updated 04/17/2020 Crankshaft and camshaft updated to eliminate 2mm rods and the need for glue.

Complete hardware kits are available that include all non-printed parts. Kit includes, spring, bearings, fasteners, electronics, DC motor, etc. Everything needed to build the model except the printed parts. https://www.makerrx.com/collections/projectkits/products/mrx5

The engine stand model as well as links to the hardware kit can be found here https://www.thingiverse.com/thing:2225638

This model is fully functioning – belts, pistons and other engine parts move and work just like the real engine, but without the fuel, oil and combustion. Some previous experience printing and assembling complex 3D printed designs is recommended prior to printing this.

https://www.youtube.com/watch?v=hRUQLCHZcgg&t=3s

Thingiverse

Ford Flat Head V8 Working Model Engine

ericthepoolboy ericthepoolboy (abre em nova aba)
3,775
Curtidas
0
Downloads
4,419
Coleções
34
Impressões
Licença Creative Commons - Attribution - Non-Commercial
Arquivos (90)
Upper_intake_manifold.stl 13 MB
Crankshaft_5.STL 496.3 KB
Air_Filter_Top.stl 1.1 MB
Piston.stl 158.9 KB
Oil_Pan_Starter_Flange.stl 267.1 KB
Main_Bearing_Cap_-_Rear.stl 59.3 KB
Main_Bearing_Cap.stl 55.6 KB
Spring_Retainer.stl 32.3 KB
Air_Filter_Media.stl 92.7 KB
Valve_Lifter.stl 24.3 KB
Mechanical_Fuel_Pump.stl 781.6 KB
Waterpump_-_Mirrored.stl 762.2 KB
Spark_Plug_Wire_Holder_-_2.stl 25.7 KB
Oil_Pan_-_Front.stl 266.6 KB
Spark_Plug_Wire_Holder_-_4_-_Square.stl 38.9 KB
Carburetor_-_Lower.stl 209.8 KB
Connecting_Rod_Bearing_Cap.stl 56.5 KB
Cam_Lobe_11.stl 76.6 KB
Cam_bearing_seat_3.stl 75.9 KB
Carburetor_-_Upper.stl 848 KB
Crank_Gear.stl 2.5 MB
Oil_Pan.stl 1.1 MB
Cam_Lobe_15.stl 96.2 KB
Spark_Plug_Wire_Holder_-_3.stl 30.9 KB
Exhuast_Header_-_1.stl 975.9 KB
Valve.stl 104.7 KB
Cam_Lobe_12.stl 98.3 KB
Distributor_Cap_-_For_Wires.stl 1 MB
Cam_Lobe_5.stl 105.7 KB
Intake_Manifold.stl 7.3 MB
Bearing_Retainer_1.stl 56.9 KB
Spark_Plug_Wire_Holder_-_4.stl 37 KB
Spark_Plug_Boot_-_Hollow.stl 298.8 KB
Cam_Lobe_9.stl 108.9 KB
Fan_Bracket.stl 53 KB
Generator.stl 286.1 KB
Water_pump_pulley.stl 83 KB
Generator_Pulley.stl 66.6 KB
Crankshaft_4.stl 451.3 KB
Timing_Cover.stl 1.6 MB
Cam_bearing_seat_1.stl 104.2 KB
Cam_Lobe_10.stl 111.2 KB
Flywheel.stl 913.5 KB
Cam_Lobe_8.stl 159 KB
Cam_Lobe_7.stl 75.7 KB
Cam_Lobe_1.stl 75.7 KB
Oil_Breather_Tube.stl 243.7 KB
Generator_Cooling_Fan.stl 82.5 KB
Spark_Plug.stl 364.5 KB
Starter_Drive_Gear.stl 185.6 KB
Cam_Lobe_14.stl 78.2 KB
Fan_pulley.stl 186 KB
Crankshaft_Rear_Bearing_Surface.stl 176.8 KB
Connecting_Rod.stl 37.6 KB
Crankshaft_Center_Bearing_Surface.stl 78 KB
Cam_Lobe_6.stl 107.5 KB
Cam_Lobe_3.stl 121.8 KB
6701zz_2mm_spacer.STL 44.2 KB
Air_Filter_Bottom.stl 260.7 KB
Cylinder_Head.stl 4.5 MB
Starter_Motor_Cover_-_2_repaired.stl 35.9 KB
Exhuast_Header_-_2.stl 965.4 KB
Distributor.stl 178.9 KB
Flathead_V8_Engine_Block.stl 15.6 MB
Crankshaft_3.stl 517.5 KB
Cam_Lobe_2.stl 99.1 KB
Valve_Guide.stl 115.3 KB
Cam_Lobe_16.stl 131.4 KB
6700zz_2mm_spacer.STL 43.8 KB
Crank_Pulley.stl 265.7 KB
Cam_Lobe_13.stl 129 KB
Cam_Lobe_4.stl 74.9 KB
Cooling_Fan_repaired.stl 435.1 KB
Cam_bearing_seat_2.stl 104.3 KB
Throttle_body_spacer.stl 388.8 KB
Generator_Bracket.stl 43.1 KB
Starter_Motor_Cover_-_2_repaired.stl 35.9 KB
Cam_Gear.stl 7.8 MB
Oil_Pan_-_Full_Version_repaired.stl 1.2 MB
Waterpump_-_modded_-_No_Hex_nuts_used_as_spacers.stl 1.6 MB
Spark_wire_former_2_-_scaled.stl 98.5 KB
Spark_wire_former_3-_scaled.stl 46.6 KB
Spark_wire_former_1_-_scaled.stl 361.1 KB
Spark_plug_boot_combined_-_Passenger_Side.stl 1019.6 KB
Spark_plug_boot_combined_-_Drivers_Side.stl 1019.6 KB
Connecting_Rod_Journal_Spacer.stl 22.7 KB
Crankshaft_Connecting_rod_bearing_surface.stl 34.3 KB
Crankshaft_6.STL 326.7 KB
Crankshaft_2.STL 497.3 KB
Crankshaft_1.STL 312.5 KB
Ver no Thingiverse (abre em nova aba)
Comparar agora