Assemblable tool holder blocks

This is a set of tool holder blocks.
Yes, it's that easy as you think!

Why not design / print / assemble / organize these parts in our own way?
Or, redesign our own holder bricks and join the tab / slot part, just like a interlocking puzzle!
The last thing to do is screwing this set on the wall.

No more giant printing piece - with unsatisfied design!

========== about the bricks : ==========
No. 00, 01, 02 is for screwing the tool holder to the wall.
No. 03, 04, 08 screw drivers (diameter 4 / 8 / 9.5 mm).
No. 05 quick wrench.
No. 06 digital caliper.
No. 07 scissors.
No. 09 nail drawer.
No. 10 cutter.
No. 11 pliers.
No. 12 smooth file.

Unit_Yin = slot.
Unit_Yang = tab.
the width of each block is 15 mm.

=================================

It can be very easy to modify the block and add slot and tab part at two sides.
Enjoy it and have fun!

Printing Profile :
infill : 20%
shells : 2
layer height : 0.2 mm
raft : yes
support : yes
material use : around 84 g
Print time : around 7.5 hours

for someone have curling problem with big piece printing, you can check this page of No. 09 "Design with mouse ears".
http://goo.gl/xyWeCu

Update!!! add 3 more block for hold onto Replicator 2.
Update!!! add 6 joints for more rows! (@heytiger)

Descrição