Upscaled Geoffro's most awesome slimer model.

This was cut down to max out the DS5 build plate potential and nearly 1:2 scale. Of course you will need to rescale all parts to suit your own needs.

If you find any bugs just let me know. It may be a while before i attempt this build myself.

Main model mesh has 90% polygon reduction (70 to 7Mb)

Print settings: supports required. set to 90 degrees or less as required. Layer height as of your choice. 3 to 4 layer wall thickness (1.6mm) 5% infill

Updates: Head from 1.1 to 1.2. Made good boundary edges and installed higher resolution eyes.