This case was designed for the Hypercube Evolution (3030 aluminum profile) to hold the power switch and plug that supplies line voltage to the 24V power supply. The design is compact and small.

Two M5x10mm hex bolts w/ hammer nuts are required to mount the case. The plug is mounted with two M3x10mm screws and nuts.

2017.10.22 - Update

The switch and plug used in this setup:

Marquardt Rocker Switch MFG Part No:1801.6116

Power Socket Connector AC-04 Black 3 Pin IEC320 C14 250V 10A Plug Outlet

2017.10.23 - Created a case for an IEC320 C14

See images above for the dimensions.