Hi, welcome to my first ever 3d model!

This mini dock uses the original dock's docking guidance to prevents damaging your console's USB port. It also has openings for the air vents behind the console for air intake.

You will need the original electronics, the base of the USB port, 4 silver and 4 black screws or 8 silver screws from the original dock.

The text-based assembly instructions are below, you can refer to the images above:

1. Connect USB ribbon and led cable to the board
2. Insert the LED into the slot on the base of the dock so the LED lines up with the opening
3. Slide the board into the base and secure with 4 silver screws
4. Insert the base of the USB port into the 4 pillars in the dock
5. Insert the springs, the guidance to the USB port base
6. Close up the dock by lining up the locking mechanism and the screw holes, sealed everything off with 4 silver or black screws

Enjoy my first creation!