###Split 1x2x3 Ok, Ryan, you win. I like "split 1x2x3" a lot better than "1x2x3 2x2x3 mashup", but it's not like it was YOUR idea to name it "split" anyways! >:(

Anyhow, this is my 1x2x3 with sliding caps and center supports. Also, I invented this puzzle so your technically downloading the original even though I uploaded this design way after Ryan. Support the designers! If you haven't yet played with this puzzle it's moderately hard, unlike its 1x2x3 counterpart, and is actually slightly fun to solve. It also looks crazy bad when scrambled. Go ahead! Print away!

####Print: + 1 x Center-1 + 1 x Center-2 + 4 x Corner-1 + 4 x Corner-2 + 2 x Cap

####Assembly First, slide all the corner pieces into the centers like you would on a 1x2x3. To assemble the cores you will need one M3 screw and nut as well as a spring. Put the nut in the center with the hexagonal hole. Put the spring on the screw and put it through the other centerpiece. Screw the screw in the nut. :l rather simple. Slide the two caps in and apply stickers to secure them in place. And that's it, folks!

####Disclaimer This puzzle is built with zero tolerance meaning that there is no space between the pieces. You will probably need to do a little sanding to get the pieces just right.